Skip to content

Analysis options

Drained or undrained condition: choose the first option for an analysis in terms of effective stresses, the second in terms of total stresses. In this regard, the program will use for the computation the saturated weight and undrained cohesion cu, if is chosen the undrained analysis, and the parameters c and j with the natural unit weight if the drained analysis is chosen.

Exclusion conditions: Excludes from the analysis those surfaces whose intersect points upstream and downstream fall in the same segment of the profile or, those for which the above intersections fall within the specified distance (exclude surfaces with intersection less than...).

Exclude surfaces exiting on the upslope face of non-deformable walls (thrust wedge): on by default. Surfaces starting from the backfill behind a non-deformable wall and exiting on the wall face, above the foundation level, do not cut the wall, so the wall does not enter their calculation: they are the thrust wedge retained by the wall, and their safety factor is the same with and without the wall. Their safety is checked by designing the wall (overturning, sliding and bearing capacity of the foundation, structural checks of the reinforced concrete or gabion wall), not by global stability, which concerns the surfaces passing under the wall foundation. At the end of the calculation Slope reports how many surfaces were excluded. Clearing the box puts them back in the search, and the program warns if the critical surface is one of them. The choice is saved in the project and stated in the report, below the walls table.

Function Morgenstern and Price: For the stability analysis with the method of Morgenstern & Price is possible to choose different trends of the distribution function of the forces of the interface - it can be constant - acme - sinusoidal.

Janbu's parameter: For the analysis with the method of Janbu is permitted to assign a value to the parameter chosen by the user.

DEM method: Using the DEM method you it can be performed the stability analysis with redistribution of stresses.