Skip to content

Dynamic Probing

The full manual of Dynamic Probing is here: https://help.geostru.io/dynamic/en/

How to insert lithological patterns (TEXTURE)

How to insert lithological patterns (TEXTURE)

A new window will open, inside of which you need to click the three dots next to the various textures:

Another window will open, and you will need to go to This PC, Local Disk C, Geostru 2019/2020/2021/2022:

Inside this folder, you will find the various patterns. You will need to follow this process for all 5 patterns.

How can I exclude a value of number of strokes in Dynamic Probing from processing?

Go to the data input window, select the value to be excluded, right-click choose the option Exclude/Include Value

When sorting by author in the report, I noticed that the unit weight of volume does not match in the first table of the test and the one in ‘Estimation of geotechnical parameters for Test No. ’

The first table shows the PUV values entered in the Data Input section (the user can enter the value or calculate it automatically using the Meyerhof method – right-click and select the option), whereas the GEOTECHNICAL PARAMETER ESTIMATION TEST table shows the data relating to the selected author. For cohesive soils, the values are unique as there is only one author; for non-cohesive soils, they vary as there are several authors that can be selected. Therefore, if an author other than Meyerhof is selected, the results will differ between the two tables.


Didn't find the answer? If your program has an active update plan, open a request on support.geostru.eu.