Skip to content

3D view

The 3D view button in the VIEW menu (after "Hide stratigraphy") opens, in a tab next to the geotechnical section, the pile and the stratigraphy in three dimensions:

  • the soil layers, semi-transparent and with the stratigraphy colours; the soil block ends just below the pile tip;
  • the water table, at the depth given in Soil geometry and water table;
  • the project pile in its data colour: reinforced concrete pile with longitudinal bars and links, micropile with shaft, bulb and tube or bars, screw pile with its helices; the part above ground level is shown too.

Rotate with the left button, pan with the right or middle button and zoom with the wheel. The toolbar at the top has the standard views (Plan, Section, Side, Perspective), terrain transparency, cutting plane, measurements and image or DXF export.

Each click on the button redraws the view with the current data. If the pile has no diameter and length yet, the program asks for them. In pile cap projects the button opens the pile cap 3D view. Drawings stay in plan and section.

©Geostru