Skip to content

Statistical aggregation across tests

When two or more tests are included in the calculation report, the section STATISTICAL AGGREGATION ACROSS TESTS appears at the end of the report, after the individual tests. For each parameter it summarizes in one table the values obtained in the different tests of the same site, layer by layer.

Tests considered

  • The aggregation includes the tests selected for the report and calculated with processing on stratigraphy.
  • Tests processed by step have layers a few centimetres thick and are not aggregated.
  • The reference test is the first selected test: the table rows are its layers.

How layers are matched

The tests of a site rarely have the same stratigraphy, so layers are matched by depth: for each layer of the reference test, in every other test the layer that overlaps it most is taken, provided it covers at least 30% of its thickness. A test with no layer overlapping enough does not contribute to that row.

For cohesive soil parameters only cohesive (or cohesive-granular) layers of the other tests count, for granular soil parameters only granular (or cohesive-granular) layers. Nspt applies to all layers.

Values used

For each test the value computed with the correlation chosen for that test is used, with the parameters set by the user: it is the same value shown in the report of the single test. It is not the mean of all authors.

Statistical processing of blows. If the statistical processing of Nspt is not the Mean (for example mean minus deviation or normal distribution), the parameters of each test are already derived from a reduced value and characteristic values taken from the aggregation reduce it a second time. In this case the report flags it at the start of the section: to use the aggregation set the statistical processing to Mean.

Parameters

Soil Parameters
All layers Nspt
Cohesive soils Undrained cohesion, Oedometric modulus, Elastic modulus
Granular soils Shear strength angle, Relative density, Elastic modulus, Oedometric modulus

Table columns

Column Meaning
Layer, Depth layer and depth of the reference test
Mean arithmetic mean of the test values
Median middle value of the sorted values
Std. dev. sample standard deviation (n − 1)
5th percentile value below which 5% of the values fall (linear interpolation)
Min, Max minimum and maximum value
n number of tests that contributed

With few tests (small n) the standard deviation and the 5th percentile are not very meaningful: read them together with n.

©Geostru